RRB JE Syllabus for Civil Engineering for CBT 1, & 2

RRB JE Syllabus for Civil & Allied Engineering (Civil Engineering, B.Sc., in Civil Engineering of 3years duration, Combination of any sub stream of basic streams of Civil Engineering). RRB JE Exam Pattern for CBT 1, & 2. For Knew RRB JE 2019 Syllabus for CBT 1, 2 for reads full articles.

Centralized Employment Notification Number:- CEN 03/2018
Total Vacancy: 13487

Short Information: Railway Recruitment Board (RRB) has given a notification for the recruitment of Junior Engineer, Depot Material Superintendent (DMS) , Chemical & Metallurgical Assistant (CMA) for 13487 vacancies.

RRB JE Syllabus 2019 Exam Date: RRB JE Computer Based Test (CBT 1) Tentatively scheduled during April/May, 2019

rrb je syllabus for ce
RRB JE Syllabus for Civil Engineering
1st Stage CBT: RRB JE 2019 Exam Pattern

Duration : 90 minutes (120 Minutes for eligible PwBD candidates)
No of Questions : 100

Negative Marking: There shall be negative marking for incorrect answers in CBTs. 1/3rd of the marks allotted for each question shall be deducted for each wrong answer.

RRB JE Syllabus for CBT 1: Civil & Allied Engineering


Mathematics: Number systems, BODMAS, Decimals, Fractions, LCM and HCF, Ratio and Proportion, Percentages, Mensuration, Time and Work, Time and Distance, Simple and Compound Interest, Profit and Loss, Algebra, Geometry, Trigonometry, Elementary Statistics, Square Root, Age Calculations, Calendar & Clock, Pipes & Cistern.

General Intelligence and Reasoning: Analogies, Alphabetical and Number Series, Coding and Decoding, Mathematical operations, Relationships, Syllogism, Jum-bling, Venn Diagram, Data Interpretation and Sufficiency, Conclusions and Decision Making, Similarities and Differences, Analytical reasoning, Classification, Directions, Statement – Arguments and Assumptions etc.

General Awareness: Knowledge of Current affairs, Indian geography, culture and history of India including freedom struggle, Indian Polity and constitution, Indian Economy, Environmental issues concerning India and the World, Sports, General scientific and technological developments etc.

General Science: Physics, Chemistry and Life Sciences (up to 10th Standard CBSE syllabus).

The section wise Number of questions and marks are as below :

Subjects
No. of Questions
Marks
Mathematics
30
30
General Intelligence & Reasoning
25
25
General Awareness
15
15
General Science
30
30
Total
100
100
Time in Minutes
90

   
Note:- Minimum percentage of marks for eligibility in various categories: UR -40%, OBC-30%, SC-30%, ST -25%.

RRB JE 2019 Syllabus for CBT 2: Civil & Allied Engineering


2nd Stage CBT: Short listing of Candidates for the 2nd Stage CBT exam shall be based on the normalized marks obtained by them in the 1st Stage CBT Exam. Total number of candidates to be shortlisted for 2nd Stage shall be 15 times the community wise total vacancy of Posts notified against the RRB as per their merit in 1st Stage CBT.

Duration : 120 minutes (160 Minutes for eligible PwBD candidates accompanied with Scribe)
No of Questions : 150
Exam Type:- The Questions will be of objective type.

Subjects
No. of Questions
Marks
Basics of Environment and Pollution Control
10
10
Basics of Computers and Applications
10
10
General Awareness
15
15
Physics & Chemistry
15
15
Technical Abilities
100
100
Total Marks
150
150

Note:- Minimum percentage of marks for eligibility in various categories: UR -40%, OBC-30%, SC-30%, ST -25%.

General Awareness: Knowledge of Current affairs, Indian geography, culture and history of India including freedom struggle, Indian Polity and constitution, Indian Economy, Environmental issues concerning India and the World, Sports, General scientific and technological developments etc.

Physics and Chemistry: Up to 10th standard CBSE syllabus.

Basics of Computers and Applications: Architecture of Computers; input and Output devices; Storage devices, Networking, Operating System like Windows, Unix, Linux; MS Office; Various data representation; Internet and Email; Websites & Web Browsers; Computer Virus.

Basics of Environment and Pollution Control: Basics of Environment; Adverse effect of environmental pollution and control strategies; Air, water and Noise pollution, their effect and control; Waste Management, Global warming; Acid rain; Ozone depletion.

Technical Abilities: Civil & Allied Engineering

Technical Abilities Syllabus for Civil & Allied Engineering


Engineering Mechanics- Force (resolution of force, moment of force, force system, composition of forces), Equilibrium,
Friction, Centroid and Center of gravity, Simple machines.

Building Construction- Building components (substructure, superstructure), type of structure (load bearing, framed and
composite structures).

Building materials- Masonry materials (stones, bricks, and mortars), Timber and miscellaneous materials (glass, plastic, fiber, aluminum steel, galvanized iron, bitumen, PVC, CPVC, and PPF).

Construction of substructure- job layout, earthwork, foundation (types, dewatering, coffer dams, bearing capacity).

Construction of superstructure- stone masonry, brick masonry, Hollow concrete block masonry, composite masonry, cavity wall, doors and windows, vertical communication (stairs, lifts, escalators), scaffolding and shoring.

Building finishes- Floors (finishes, process of laying), walls (plastering, pointing, painting) and roofs (roofing materials including RCC).

Building maintenance- Cracks (causes, type, repairs- grouting, guniting, epoxy etc.), settlement (causes and remedial measures), and re-baring techniques.

Building drawing- Conventions (type of lines, symbols), planning of building (principles of planning for residential and public buildings, rules and byelaws), drawings (plan, elevation, section, site plan, location plan, foundation plan, working drawing), perspective drawing.

Concrete Technology- Properties of various types/grades of cement, properties of coarse and fine aggregates, properties of concrete (water cement ratio, properties of fresh and hardened concrete), Concrete mix design, testing of concrete, quality control of concrete (batching, formwork, transportation, placing, compaction, curing, waterproofing), extreme weather concreting and chemical admixtures, properties of special concrete (ready mix, RCC, pre-stressed, fiber reinforced, precast, high performance).

Surveying- Types of survey, chain and cross staff survey (principle, ranging, triangulation, chaining, errors, finding area), compass survey (principle, bearing of line, prismatic compass, traversing, local attraction, calculation of bearings, angles and local attraction) leveling (dumpy level, recording in level book, temporary adjustment, methods of reduction of levels, classification of leveling, tilting level, auto level, sources of errors, precautions and difficulties in leveling), contouring (contour interval, characteristics, method of locating, interpolation, establishing grade contours, uses of contour maps), area and volume measurements, plane table survey (principles, setting, method), theodolite survey (components, adjustments, measurements, traversing), Tacheometric survey, curves (types, setting out), advanced survey equipment, aerial survey and remote sensing.

Computer Aided Design- CAD Software (AutoCAD, Auto Civil, 3D Max etc.), CAD commands, generation of plan, elevation, section, site plan, area statement, 3D view.

Geo Technical Engineering- Application of Geo Technical Engineering in design of foundation, pavement, earth retaining structures, earthen dams etc., physical properties of soil, permeability of soil and seepage analysis, shear strength of soil, bearing capacity of soil, compaction and stabilization of soil, site investigation and sub soil exploration.

Hydraulics- properties of fluid, hydrostatic pressure, measurement of liquid pressure in pipes, fundamentals of fluid flow, flow of liquid through pipes, flow through open channel, flow measuring devices, hydraulic machines.

Irrigation Engineering- Hydrology, investigation and reservoir planning, percolation tanks, diversion head works.

Mechanics of Structures- Stress and strain, shear force and bending moment, moment of inertia, stresses in beams, analysis of trusses, strain energy

Theory of structures- Direct and bending stresses, slope and deflection, fixed beam, continuous beam, moment distribution method, columns.

Design of Concrete Structures- Working Stress method, Limit State method, analysis and design of singly reinforced and doubly reinforced sections, shear, bond and development length, analysis and design of T Beam, slab, axially loaded column and footings.

Design of Steel Structures- Types of sections, grades of steel, strength characteristics, IS Code, Connections, Design of tension and compression members, steel roof truss, beams, column bases.

Transportation Engineering- Railway Engineering (alignment and gauges, permanent way, railway track geometrics, branching of tracks, stations and yards, track maintenance), Bridge engineering (site selection, investigation, component parts of bridge, permanent and temporary bridges, inspection and maintenance), Tunnel engineering (classification, shape and sizes, tunnel investigation and surveying, method of tunneling in various strata, precautions, equipment, explosives, lining and ventilation).

Highway Engineering- Road Engineering, investigation for road project, geometric design of highways, construction of road pavements and materials, traffic engineering, hill roads, drainage of roads, maintenance and repair of roads.

Environmental Engineering- Environmental pollution and control, public water supply, domestic sewage, solid waste management, environmental sanitation, and plumbing.

Advanced Construction Techniques and Equipment- Fibers and plastics, artificial timber, advanced concreting methods (under water concreting, ready mix concrete, tremix concreting, special concretes), formwork, pre-fabricated construction, soil reinforcing techniques, hoisting and conveying equipment, earth moving machinery (exaction and compaction equipment), concrete mixers, stone crushers, pile driving equipment, working of hot mix bitumen plant, bitumen paver, floor polishing machines.

Estimating and Costing- Types of estimates (approximate, detailed), mode of measurements and rate analysis

Contracts and Accounts- Types of engineering contracts, Tender and tender documents, payment, specifications.

Thank You for Reading Article on RRB JE Syllabus and Pattern for Civil & Allied Engineering.